Unterschiede
Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
Nächste Überarbeitung | Vorhergehende Überarbeitung | ||
elektronik:bcl-1 [2014/09/12 08:00] – angelegt volkerp | elektronik:bcl-1 [2014/12/18 14:13] (aktuell) – [BCL-1 remote control clock] volkerp | ||
---|---|---|---|
Zeile 1: | Zeile 1: | ||
- | ====== BCL-1 remote control | + | ====== BCL-1 remote control |
- | Ich habe mir 2014 bei ebay einen Bausatz "BCL-1 Remote Control Clock Suite DIY Kit" für ca 7 € gekauftp | + | Ich habe mir 2014 bei ebay einen Bausatz "BCL-1 Remote Control Clock Suite DIY Kit" für ca 7 € gekauft. |
- | Kit Modell: BCL-1 | + | Das ist eine Digitaluhr in einem Lampengehäuse, |
- | Betriebsspannung: | + | |
- | Fernbedienung Größe: 86*40*6 mm | + | {{: |
+ | |||
+ | Der Bausatz enthält alle Teile incl. Knopfzellen! Achtung: Es müssen auch mehrere SMD-Bauteile gelötet werden! | ||
+ | |||
+ | Kit Modell: BCL-1 \\ | ||
+ | Betriebsspannung: | ||
+ | Fernbedienung Größe: 86*40*6 mm \\ | ||
Lampengehäuse Durchmesser: | Lampengehäuse Durchmesser: | ||
Funktionen: | Funktionen: | ||
- | 1. Alarm (7-22 Uhr Stundensignal, | + | - Alarm (7-22 Uhr Stundensignal, |
- | 2. Fünf-Kanal-Wecker (kann eingeschaltet oder ausgeschaltet werden) | + | |
- | 3. Fehlerkorrektur (mit Software-Korrektur X Tagen Y Sekunden) die Korrekturfunktion über Fernbedienung wählen, setzen Sie die Parameter X und Y, Y positiv für X Tage plus Y Sekunden, Y für X Tage minus Y. negativ) | + | |
- | 4. Power-Off und Speicher (dank Clock-Chip + Back-up-Batterie, | + | |
- | 5. genaue Zeit (Uhr-Chip-Quarz mit Fehler 5 PPM; außerdem Fehlerkorrekturverfahren) | + | |
+ | |||
+ | Wie immer bei solchen Produkten aus China ist es nicht so einfach, Unterlagen etc. zu finden. Nach einiger Suche halfen folgende Links: | ||
+ | |||
+ | http:// | ||
+ | |||
+ | http:// | ||
+ | |||
+ | http:// | ||
+ | |||
+ | http:// | ||
+ | |||
+ | http:// | ||
+ | |||
+ | http:// | ||
+ | |||
+ | http:// | ||
+ | |||
+ | ===== Operating instructions ===== | ||
+ | |||
+ | BCL-1Remote control clock specification | ||
+ | |||
+ | **1> | ||
+ | |||
+ | - Power lost memory | ||
+ | - Checking the time precisely, hourly chime | ||
+ | - Error correction | ||
+ | - Can turn off the digital display | ||
+ | - 5 channel alarm clock | ||
+ | |||
+ | |||
+ | **2> | ||
+ | |||
+ | - Kit model: BCL-1 | ||
+ | - Package name: 4 -bit remote control clock | ||
+ | - PCB size :F57mm 1.0mm thick | ||
+ | - Work voltage: 5V (Powered by USB) | ||
+ | - lamp body size:F60mm | ||
+ | |||
+ | |||
+ | **3> | ||
+ | |||
+ | The whole system is made up of MCU minimum system, infrared receiver circuit, | ||
+ | display circuit, buzzer circuit, the clock chip and power supply. | ||
+ | |||
+ | - MCU minimum system: U1(STC11F04E), | ||
+ | - Infrared receiver circuit: U3 is responsible to receive the signal that is sent by remote control. After amplification, | ||
+ | - Display circuit: | ||
+ | - Buzzer circuit: R6, Q5 and LS1,key tone of the clock, the sound of hourly chime, the bell of clock. Sound is output from P3.1 port of MCU and make a sound by Q5 driving LS1 | ||
+ | - Clock chip: | ||
+ | - Power Supply: J1 connect power line and C4 smoothing. | ||
+ | **4> | ||
- | http:// | + | **A General function of keys: ** |
- | http://www.youtube.com/ | + | the key in the center is main menu; The increase key and decrease key control " |
+ | - The **submenu of adjusting time**: the place where twinkles on digital tube is currently selected. By pressing the keys of “increase” “decrease” “left and" “right" | ||
+ | - **Submenu of setting alarm clock**: First, it is the choice of main switch of 5 channel alarm clock. The first bit displays C and two bits at the end when flash will display ON or OFF. It is switched by the keys of “increase” “decrease" | ||
+ | - **Submenu of error correction**: | ||
+ | **B The quick operating function of key ** | ||
+ | - Under the normal walking hour interface, press the key of “shutdown" | ||
+ | - Under the normal walking hour interface, press the key of “shaking head" can switch the interface between hour or minute interface and minute or second interface. | ||
+ | - Under the normal walking hour interface, press the key of “turn speed" can choose ON or OFF of whole 5 channel alarm clock. After setting well, press the key in the center to enter the choice of ON or OFF about the function of hourly chime. Then press the key in the center and return to the normal walking hour interface | ||
+ | - Under the minute and second walking hour interface and display SEC. The second bit flashes, a few seconds later, the minute and second flash together. And according to the accurate time, press the key “time" |